Serving the Syracuse area  ·  (315) 679-5055  ·  Open Mon-Sun 7am-7pm
📞 (315) 679-5055 Free Quote

Metal Roofing in Syracuse, NY (13202) · Local Professionals

Syracuse Metal Roofing · Fast response in Syracuse and the Syracuse area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+323Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Syracuse winters don't mess around, and neither do the roofs that survive them. From the steep Victorians in Strathmore and Sedgwick to the low-pitched worker doubles on Tipperary Hill and the brick ranches out in Eastwood, every neighborhood here has its own roofing quirks and its own snow load story.

Homeowners in 13202 call Syracuse Metal Roofing because we know what lake-effect snow, ice dams, and freeze-thaw cycles do to a roof. We've climbed the steep gables near Westcott, re-fastened panels on the doubles in the Valley, and installed snow guards on homes that sit under big maples from Onondaga Park to the Near Westside.

Metal Roofing in Syracuse (13202)

Syracuse sits at the southeast end of Onondaga Lake on glacial till and clay, and that ground moves with the seasons. The housing stock tells the story too: 1880s to 1920s Victorians with slate-trimmed steep roofs in Strathmore and Sedgwick, low-pitch doubles across Tipperary Hill and the Near Westside, Dutch Colonials and Cape Cods with dormers in Eastwood and Brighton, and 1960s-80s splits out toward Liverpool and DeWitt. Each one handles snow differently. The steep roofs shed better, but the low-pitch doubles are where ice damming and fastener failure show up first. We size snow guards and ice protection for the actual pitch and the actual load, not a generic spec sheet.

Our team has worked on corrugated barn roofs toward Cazenovia and Cato, standing seam on lakeside homes in Skaneateles and Fayetteville, and stone-coated steel on colonials in Manlius and Camillus. We know how to work around tight lot access on the Near Westside, coordinate with historic district review when a panel profile or color needs approval, and pull the right permits for a full re-roof. If you're in 13202 or anywhere around Syracuse, we've probably seen a roof like yours.

Our services in Syracuse

How a Job Works in Syracuse

Step 1: You call (315) 679-5055 or request a free estimate online. We schedule an on-site assessment, walk the roof, check the flashing, fasteners, and decking, and talk through what we find. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required permits with the local building department and schedule the work. On tight city lots or streets with mature maples, we plan material staging and dumpster placement ahead of time. If your home is in a historic district or under HOA review, we help coordinate the paperwork so the panel profile and color get approved without surprises.

Step 3: We clean up every day and do a final walkthrough with you. Magnets go over the lawn and driveway, gutters get checked, and we make sure you know how the new roof and snow guards should perform through the first winter. We leave your property clean and walk you through the finished job.

Pricing in Syracuse depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and flashing or chimney and skylight work around $600. Snow guards and ice protection start around $1,200, and coating or painting starts around $2.50 per square foot. Commercial and agricultural work is quoted after a free estimate. Call (315) 679-5055 to get a real number for your roof.

My Victorian in Strathmore has a steep slate-trimmed roof. Can you match a metal system to that profile without losing the look?
Yes. On steep Victorian and Queen Anne roofs, we often use standing seam or metal shingle profiles that respect the original lines, and we pay attention to trim, valleys, and the slate details that give those homes their character. We'll walk the roof with you and show samples that fit the architecture before you commit.
A storm just peeled back panels on my roof in Eastwood. How fast can you get out?
We treat wind-lifted and peeled panels as a priority, especially when rain is in the forecast. Call (315) 679-5055 and we'll schedule a free inspection, secure the area if needed, and give you a written repair scope. We document storm damage for insurance purposes, though coverage decisions are always up to your carrier.
What does a typical metal roof replacement cost for a ranch in Liverpool or North Syracuse?
Most ranch and split-level replacements fall in a range based on square footage, pitch, and whether we tear off or retrofit. Installation starts around $8 per square foot, replacement around $9, and over-shingle retrofit around $7. We give you an exact price after measuring and inspecting the deck and flashing.
Do I need a permit for a metal roof in Syracuse, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary by jurisdiction. We pull the permits and coordinate inspections as part of the job. For the specific rules that apply to your address, check the City of Syracuse website or call the building department, and we'll walk you through what we handle.
My neighbor's tree hangs over the property line and drops limbs on my roof. What are my options?
Property line issues are best handled neighbor to neighbor first, and we can document any damage from fallen limbs for your records. If your home is under HOA review, we help coordinate the approval for panel profile and color so the work doesn't stall. We don't remove trees, but we can recommend arborists who work in the area.
Are you insured for work on my Syracuse property?
Yes. Syracuse Metal Roofing is fully insured with general liability and workers' compensation coverage. We're happy to provide proof of insurance before work begins so you have it for your records.
What maintenance should I do before winter to prevent ice dams on my Syracuse roof?
Clear gutters and downspouts before the first freeze, check for loose or backed-out fasteners, and look for flashing gaps at chimneys and skylights. On homes that historically ice up at the eaves, snow guards and ice protection help, and we can inspect and quote that before the lake-effect season starts. Call (315) 679-5055 to schedule a pre-winter inspection.
Why choose us?

Trusted professionals in Syracuse

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Syracuse

All your work handled by qualified professionals in Syracuse

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

323+ Verified Client Reviews in Syracuse

⭐⭐⭐⭐⭐ 4.9/5 · 323 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Syracuse · Response within 24h · No commitment · ☎ (315) 679-5055

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Syracuse ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm