Licensed & Insured, in Syracuse and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Syracuse
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (315) 679-5055 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Syracuse and surrounding areas · On-site visits included · Free estimate within 24h
Syracuse Metal Roofing is a team of local certified professionals based in Syracuse. We respond quickly in Syracuse and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (315) 679-5055⭐⭐⭐⭐⭐ 4.9/5 · 323 verified Google reviews
“We needed a new metal roof on our hay barn out past Manlius and these guys knocked it out in three days with a four-man crew. The corrugated panels went on straight and they cleaned up every last screw and scrap piece before they left. Couldn't believe how smooth it went.”
Agricultural Metal Roofing
“Had a small copper roof over our front porch redone on our brick house. It was a tricky little job and a couple other outfits wouldn't even bother with it, but Syracuse Metal Roofing treated it like it mattered. The soldered seams look clean and the copper is already starting to patina nicely.”
Copper & Specialty Metal Roofing
“Our old farmhouse barn roof was leaking in a few spots and honestly I figured we'd have to tear the whole thing off. They walked me through a full replacement with ribbed panels instead and the price was fair. Two weeks in and not a drop inside, even after that heavy rain.”
Metal Roof Replacement
“Standing seam on our brick colonial and it looks fantastic. The crew was respectful, showed up when they said they would, and the cleanup was honestly better than I expected. Only gripe is the project ran about a week longer than quoted, but the finished roof speaks for itself.”
Standing Seam Metal Roofing
“Had a leak around a chimney flashing that two other roofers couldn't figure out. These guys found it in twenty minutes, replaced the flashing, and re-fastened some loose screws while they were up there. Relieved doesn't even cover it.”
Metal Roof Leak Repair
“New metal roof on our ranch house, about 1,800 square feet. The crew of three finished in four days and the site was spotless every single evening. What impressed me most was how they explained the flashing and snow guard placement before starting so there were no surprises.”
Metal Roof Installation
“Went with the retrofit over our existing shingles to save some money and I'm glad we did. They added the furring strips, checked everything over, and the new panels went on without a hitch. Saved us a full tear-off and the roof looks brand new.”
Metal Roof Over Shingles (Retrofit)
“Had them out for an inspection on our Tudor-style house because I wasn't sure if the roof could even take metal. They were upfront that a full replacement wasn't necessary yet and just did some screw replacement and re-fastening on the loose sections. Honest folks, they could've easily sold me a whole new roof and didn't.”
Metal Roof InspectionReal photos of our work in Syracuse · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel install | Starting at $8/sq ft | Includes tear-off, ice-and-water membrane at eaves, synthetic underlayment and standard trim. |
| Standing seam install | Starting at $13/sq ft | Concealed fasteners, raised seams and custom panel lengths; pitch and dormer count move the price. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Textured panel systems for historic-district or HOA roofs; profile and color availability affect cost. |
| Complex or large-scale job | On estimate | Steep Victorian roofs, multiple valleys, turrets or deck repair need an on-site walk before pricing. |
| Travel | Included | In Syracuse and surrounding Onondaga County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (315) 679-5055, written scope, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation | Starting at $10/sq ft | Panels roll-formed to length, underlayment and standard trim included; steep pitch or cut-up roofs raise the rate |
| Standing seam replacement | Starting at $12/sq ft | Tear-off, deck inspection and new panels; soft sheathing or fascia repair on older homes adds cost |
| Standing seam over shingles | Starting at $9/sq ft | Sub-purlins and panels over an existing shingle roof where code allows; layer count and deck condition drive the price |
| Standing seam repair or re-seam | On estimate | Seam, flashing and panel repairs need an on-site look to price the scope and access |
| Travel | Included | In Syracuse and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (315) 679-5055, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard tear-off and metal replacement | Starting at $9/sq ft | Includes tear-off of one layer, decking inspection, underlayment, ice-and-water shield at eaves and basic flashing. |
| Steep or complex roof replacement | Starting at $12/sq ft | Includes multiple valleys, dormers or chimney flashing on steep Victorian and Colonial roofs with limited access. |
| Standing seam or specialty metal system | Starting at $14/sq ft | Includes concealed-fastener standing seam, metal shingle or stone-coated steel with custom trim and snow guards. |
| Decking repair and sheathing replacement | On estimate | Priced after tear-off reveals soft sheathing from old ice dams; needs an on-site look before a number is given. |
| Travel | Included | In Syracuse and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (315) 679-5055, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over existing shingles (ribbed panel) | Starting at $7/sq ft | Includes separation layer, panels, fasteners, and basic trim on a sound deck with standard access. |
| Standing seam retrofit over shingles | Starting at $12/sq ft | Concealed fasteners, raised seams, and a cleaner look; price rises with pitch and roof complexity. |
| Metal shingle or stone-coated steel retrofit | Starting at $14/sq ft | Includes the panel system, separation layer, and trim; historic profiles and steep pitches add labor. |
| Deck repair or flashing rebuild | On estimate | We price soft sheathing, rotted fascia, and chimney or skylight re-flashing after an on-site inspection. |
| Travel | Included | In Syracuse and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (315) 679-5055, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (penetration, boot, small flashing) | Starting at $450 | Includes one on-roof diagnosis and repair of a single failed penetration or small flashing section. |
| Fastener and screw replacement run | Starting at $650 | Covers a defined run of backed-out or corroded screws with correct replacements and new washers. |
| Panel replacement (dented or punctured) | Starting at $900 | Includes matched-profile panel, fastening and seam or lap reseal; pitch and access move the price. |
| Flashing rebuild at chimney or skylight | Starting at $1,200 | Full step, counter or valley flashing rebuild with water test; steep or slate-trimmed roofs cost more. |
| Complex or large-scale repair | On estimate | Multi-panel damage, storm-wide damage or structural decking issues need an on-site look before a number. |
| Estimate and travel | Free / Included | Free on-site estimate in Syracuse and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak repair (fastener, pipe boot, small flashing) | Starting at $450 | Includes diagnosis and a small repair, with price rising for steep pitch or difficult access. |
| Seam or panel repair | Starting at $650 | Covers seam closure or panel section replacement, with cost driven by panel type and extent. |
| Ice-dam and eave correction | Starting at $900 | Includes opening the eave detail and correcting underlayment, with price set by roof length and access. |
| Emergency tarping after a storm | Starting at $350 | Covers securing the roof against active water intrusion, with price based on roof size and height. |
| Complex or large-scale leak repair | On estimate | Needs an on-site look when the source is unclear or multiple areas are involved. |
| Estimate | Free | Response within 24 hours at (315) 679-5055, with no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted screw replacement | Starting at $750 | Covers a single-story ranch or Cape Cod with moderate fastener failure, replacement washers, and a full roof walk. |
| Full-field re-fasten and re-torque | Starting at $1,450 | Replaces all failed fasteners, steps up gauge where holes are stripped, and re-torques the field to spec. |
| Two-story or steep-pitch re-fasten | Starting at $1,900 | Adds staging, harness work, and extra labor for steep gables, dormers, and limited ladder access. |
| Panel and fastener replacement | On estimate | Needed when panels have lifted or creased from snow slide or wind, so scope must be seen on site. |
| Travel | Included | in Syracuse and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (315) 679-5055, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, standard outbuilding | Starting at $5.50/sq ft | Includes panels, trim, closures and gasketed screws on a straightforward low-pitch roof. |
| R-panel or 5V with tear-off | Starting at $7.25/sq ft | Adds shingle removal, disposal and deck inspection before new panels go down. |
| Deck or purlin repair | On estimate | Rotten framing, sagging bays or failed sheathing need an on-site look before pricing. |
| Screw replacement and re-fastening | On estimate | Priced by panel count and access, often cheaper than a full re-roof. |
| Travel | Included | In Syracuse and surrounding Onondaga, Madison and Cayuga county areas, no mileage fee. |
| Estimate | Free | Response within 24 hours at (315) 679-5055, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, standard ranch or Cape Cod | Starting at $9/sq ft | Includes tear-off of one layer, synthetic underlayment, and standard flashing on a walkable pitch |
| Metal shingle roof, steep or complex roof | Starting at $12/sq ft | Covers dormers, multiple valleys, and steep gables common on Syracuse Victorians and Dutch Colonials |
| Metal shingle roof over existing shingles (retrofit) | Starting at $7/sq ft | Skips tear-off and disposal where code allows, with strapping and underlayment over the old deck |
| Complex or large-scale job | On estimate | Multi-roof properties, historic homes, and anything needing deck replacement or custom flashing get an on-site look first |
| Travel | Included | In Syracuse and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (315) 679-5055, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof install, standard pitch | Starting at $9/sq ft | Includes tear-off, underlayment, panels and basic flashing on an accessible roof |
| Steep or cut-up roof with dormers and valleys | Starting at $12/sq ft | Higher labor and custom flashing on Victorian and Colonial roof lines |
| Deck repair and flashing rebuild | On estimate | Priced after we open the roof and see the sheathing and chimney condition |
| Snow guards and ice protection add-on | On estimate | Quoted by roof length and pitch, planned into the install rather than added later |
| Travel | Included | In Syracuse and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (315) 679-5055, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accents and flashing | Starting at $20/sq ft | Includes formed copper for chimneys, skylights, valleys and bay roofs, with soldered seams. |
| Zinc standing seam field | Starting at $28/sq ft | Includes pre-weathered zinc panels, concealed clips and underlayment rated for metal. |
| Full copper roof | Starting at $45/sq ft | Includes hand-formed copper field panels, soldered seams and all custom flashing details. |
| Custom fabrication and restoration | On estimate | Shop-formed replacement pieces matched to original profiles need an on-site look first. |
| Travel | Included | In Syracuse and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (315) 679-5055, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic coating (single coat) | Starting at $2.50/sq ft | Wash, spot prime, and one finish coat on an accessible, low-pitch roof with light chalking. |
| Full prep and recoat system | Starting at $3.75/sq ft | Rust treatment, re-fastening, base coat, and finish coat on steeper or older roofs. |
| Rust treatment and re-fastening | From $450 | Converter, spot primer, and replacement screws where fasteners have backed out or corroded. |
| Complex or large-scale job | On estimate | Steep Victorian roofs, multiple dormers, or commercial spans need an on-site look before pricing. |
| Travel | Included | in Syracuse and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (315) 679-5055, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Skylight reflash (single unit) | Starting at $600 | Includes removing old sealant, new curb flashing and a water test on one skylight. |
| Chimney flashing repair | Starting at $850 | Stepped flashing and counterflashing into mortar, priced by chase size and roof pitch. |
| Chimney cricket fabrication | Starting at $1,200 | Custom-bent diversion roof behind a wide chase, including new flashing tie-in. |
| Valley or dormer flashing | Starting at $700 | Open-valley metal or sidewall step flashing, priced by linear feet and access. |
| Complex or large-scale job | On estimate | Multiple penetrations, rotten decking or steep historic roofs need an on-site look first. |
| Estimate | Free | Response within 24 hours at (315) 679-5055, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Entry and walkway guard set | Starting at $1,200 | Seam-clamp or pad guards over one release zone, with layout and water test included |
| Full roof guard field | Starting at $2,600 | Multi-row coverage across the main slopes, priced by guard count and roof pitch |
| Snow rails and bar systems | Starting at $1,900 | Horizontal rail runs above entries and walks, priced by linear footage and staging |
| Eave ice protection | Starting at $1,400 | Underlayment and edge metal at the eave, priced by eave length and access |
| Complex or large-scale job | On estimate | Steep pitches, valleys, dormers and lakefront roofs need an on-site look first |
| Estimate | Free | Response within 24h at (315) 679-5055, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Roof, flashing, fasteners and attic-side check with photos, no obligation to book. |
| Minor repair (panel or fastener) | Starting at $350 | One to a few panels or fasteners replaced; price moves with height and access. |
| Moderate storm repair | Starting at $900 | Multiple panels, ridge cap and flashing repair; scope and panel profile drive the number. |
| Complex or large-scale job | On estimate | Widespread damage or full-slope replacement needs an on-site look before pricing. |
| Travel | Included | In Syracuse and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (315) 679-5055, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Covers visual walkover, fastener check, and written summary; price moves with roof pitch and number of penetrations. |
| Detailed inspection with written report | Starting at $250 | Includes photo documentation, remaining service life estimate, and prioritized repair list; larger or steeper roofs cost more. |
| Insurance or pre-sale documentation | Starting at $350 | Full report formatted for insurers or buyers; price depends on roof size and how many detail areas need documentation. |
| Post-storm damage assessment | On estimate | Targeted inspection after hail, wind, or ice; scope depends on damage extent and whether an insurance claim is being filed. |
| Travel | Included | In Syracuse and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (315) 679-5055, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter with snow-rated hangers | Starting at $9/linear ft | Includes on-site forming, screwed hangers and standard downspouts; steep pitch and height move the price. |
| Half-round gutter with concealed brackets | Starting at $14/linear ft | Includes traditional profile and bracket install; older fascia repair and historic review add cost. |
| Oversized 6-inch commercial run | Starting at $13/linear ft | Includes large-capacity gutter and 3x4 downspouts; long runs and high eave access raise the figure. |
| Leaf protection sized for maple seeds | Starting at $4/linear ft | Includes fine-mesh or hood guard; heavy canopy and corner cleanouts add to the per-foot rate. |
| Downspout rerouting and discharge extension | On estimate | Needs an on-site look at foundation grade and clay drainage before a number is given. |
| Estimate | Free | Response within 24h at (315) 679-5055, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written scope | Free estimate | Full roof and fastener walk-through, documented findings, and a written scope before any work is ordered. |
| Screw replacement and re-fastening | Starting at $450 | Replacing rusted or backed-out screws with coated fasteners and re-sealing laps on exposed-panel roofs. |
| Leak and flashing repair | Starting at $650 | Locating and sealing leaks at curbs, chimneys, sidewalls, and eaves, with proper flashing rather than caulk. |
| Panel replacement or retrofit | On estimate | Priced per square foot after measuring span, slope, penetrations, and tear-off or retrofit scope on site. |
| Travel | Included | In Syracuse and surrounding Onondaga and Madison county areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (315) 679-5055, with no obligation to book the work. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Syracuse usually want the same things: straight answers, a crew that knows what lake-effect snow does to a roof, and someone who will tell them when a repair is the smarter move. Syracuse Metal Roofing is that local call. We handle Metal Roof Installation, full replacement, re-roofs, and repairs on homes across the city and the surrounding towns, from steep Victorian pitches in Strathmore and Sedgwick to the low-slope doubles on Tipperary Hill and the brick ranches out toward Liverpool and North Syracuse.
This is hard country on a roof. Heavy snow load, long ice-dam seasons, freeze-thaw cycles that work fasteners loose, and a large stock of aging screw-down roofs now 15 to 30 years old. We serve Syracuse, DeWitt, East Syracuse, Liverpool, North Syracuse, and the farm country beyond, and we quote honestly whether your roof needs a service call or a replacement. Reach out for a free estimate and we will tell you what we see.
Most metal roof leaks in Syracuse trace back to a handful of causes, and each one has a clear reason. On exposed-fastener roofs, the EPDM sealing washer under each screw dries, shrinks, and cracks with age and UV exposure. That is the number one failure on 15 to 30 year old screw-down roofs, and it is why water shows up at a ceiling far from where the screw actually failed. Seams separate as panels expand and contract through freeze-thaw cycles. Pipe boots and flashing fail at chimneys, skylights, and valleys where the sealant has aged out. Wind-lifted panels after a lake-effect squall, and punctures from fallen limbs, round out the list. Our Metal Roof Repair team diagnoses the actual cause rather than patching the symptom.
Ignoring a small leak is expensive. Water tracks along purlins and decking, so the stain on your ceiling may be ten feet from the entry point. By the time it shows, sheathing can be rotted and insulation soaked and compressed, which means the repair grows from a fastener issue into a decking and insulation job. That is why we push for a look early.
Here is the honest call. If the panels are sound and the leaks come from fasteners and sealant, a full screw replacement often restores a watertight roof for a fraction of replacement cost. If panels are rusted through, seams are failing across the field, or the deck underneath is soft, replacement is the better money. We will tell you which side of that line your roof is on. For active leaks, call (315) 679-5055 or request a free estimate.
The system should match the home, not the other way around. Standing Seam Metal Roofing uses concealed clips and no exposed screws, which makes it the premium choice for the larger colonials and lakeside homes in Camillus, Manlius, Fayetteville, and Skaneateles. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, pole buildings, and shops. Metal Shingle Roofing and Stone-Coated Steel Roofing suit historic and HOA-sensitive homes, and Copper & Specialty Metal Roofing handles accents and period details.
The honest comparison: standing seam costs more up front and has no exposed fasteners to maintain. Screw-down costs less and needs its fasteners serviced over its life. Metal Roof Over Shingles (Retrofit) is a legitimate option when the deck is sound, and tear-off is the right call when it is not. We will say which one fits your roof.
Metal roof work is quoted by the job, not by a flat number off a website. Installations are typically priced per square foot, while many repairs are flat-rate. What moves the number: the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Figures you see online are typical ranges only, and final pricing depends on the roof and site conditions.
One cost note worth knowing: some carriers may offer premium discounts on metal or impact-rated roofs, though that is between you and your insurer. For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can price your actual roof.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent. Coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document what we find; what happens next is between you and your insurer.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements, fees, and inspection steps vary by city and can change. Recover over existing shingles is limited by code to a set number of existing layers, and historic district or HOA design review can restrict panel profile and color. Requirements vary, so always verify with the Syracuse building or planning department before starting your project. Questions about your roof? Reach out through our free estimate page.
Ready to get started? Syracuse Metal Roofing serves in Syracuse and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Syracuse · Response within 24h · No commitment · ☎ (315) 679-5055
Your Free Quote Request