Serving the Syracuse area  ·  (315) 679-5055  ·  Open Mon-Sun 7am-7pm
📞 (315) 679-5055 Free Quote

Metal Roofing in Fayetteville, NY (13066) · Local Professionals

Syracuse Metal Roofing · Fast response in Fayetteville and the Syracuse area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+323Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Fayetteville is the kind of village where a 1920s Colonial on a tree-lined street near the village center can sit two blocks from a newer subdivision with steep gables and wide driveways. The lots are generous, the maples are old, and the roofs take a beating from lake-effect snow and freeze-thaw cycles that start early and stay late.

Homeowners in 13066 call Syracuse Metal Roofing because we know the difference between a quick patch and a permanent fix. Whether your shingles are failing on a Cape Cod near Fayetteville Towne Center or your standing seam panels are loosening on a colonial off East Genesee Street, our team has seen it and fixed it.

Metal Roofing in Fayetteville (13066)

Fayetteville sits on higher ground than much of Syracuse, and that elevation means more snow and longer ice-dam seasons. The village’s mix of older colonials, Dutch Colonials, and Cape Cods with dormers often have low-pitched sections that trap ice at the eaves. Newer subdivisions off Route 92 and around Lyndon Corners have steeper roofs, but the same freeze-thaw cycles work on fasteners and flashing. We regularly replace shingle roofs that have been patched one too many times and repair flashing around chimneys and skylights where ice has forced its way in. The heavy clay soil and mature trees mean gutters fill fast, and we often recommend snow guards and proper drainage to keep water away from foundations.

Our team has worked on roofs throughout Fayetteville and the surrounding towns, from the historic homes near the village center to the larger properties out toward Manlius. We know what local inspectors look for and how to work with the village on permits.

Our services in Fayetteville

How a Job Works in Fayetteville

Step 1: Call us at (315) 679-5055 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and walk your roof with you to identify problem areas, discuss options, and answer questions. You get a written estimate before any work begins.

Step 2: Once you approve the estimate, we pull the required permits through the village or town and schedule the work. On tighter lots near the village center, we plan material delivery and staging carefully to avoid blocking driveways or damaging landscaping. For homes in HOA communities, we can coordinate with your board on color and profile approvals.

Step 3: After installation or repair, we clean up thoroughly, haul away old materials, and do a final walkthrough with you. We make sure you understand what was done and how to maintain your new roof. We leave your property clean and your roof ready for the next Fayetteville winter.

Pricing for metal roofing in Fayetteville depends on the size and pitch of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Snow guards start at $1,200. We provide free estimates so you get a clear, no-obligation price for your specific home. Call (315) 679-5055 to schedule.

My 1950s Cape Cod in Fayetteville gets ice dams every winter. Will a metal roof stop them?
A metal roof won’t stop ice dams on its own, but it handles them better than shingles. The key is proper attic insulation and ventilation, plus ice-and-water shield under the metal at the eaves. We often install snow guards to keep snow from sliding off in sheets. We’ll assess your attic and roof assembly during the free estimate and recommend the right combination for your home.
A storm just lifted some panels on my roof near Lyndon Corners. How fast can you get out?
We prioritize active leaks and storm damage. Call us at (315) 679-5055 and we’ll schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp or secure the area to prevent further damage and provide a written repair estimate on the spot.
What does a typical metal roof replacement cost for a 2,000-square-foot colonial in Fayetteville?
For a 2,000-square-foot home with a standard pitched roof, replacement typically falls between $18,000 and $28,000 depending on material (corrugated, standing seam, stone-coated steel), roof complexity, and whether we remove existing shingles. That’s a ballpark; we provide a firm written estimate after inspecting your roof.
Do I need a permit for a metal roof in Fayetteville, and can you handle it?
Yes, the Village of Fayetteville generally requires a roofing permit for replacements and some repairs. Requirements vary, so we confirm with the village building department before starting. We handle the permit application and inspection coordination as part of our service.
My neighbor says my new metal roof’s snow will slide onto their property. What are the rules?
Snow shedding is a common concern. We install snow guards to prevent sudden slides, which protects your landscaping, gutters, and neighbors. Property line issues are civil matters, but we can position snow guards to minimize risk. If you’re in an HOA, we’ll help you get approval for the profile and color before installation.
Are you fully insured for work on my Fayetteville home?
Yes, Syracuse Metal Roofing is fully insured with general liability and workers’ compensation coverage.
What maintenance does a metal roof need in Fayetteville’s climate?
Annual inspections are wise, especially after winter. Check for loose fasteners, debris in gutters, and any signs of ice damage around flashing. We offer inspection and maintenance services, including screw replacement and re-fastening, to keep your roof performing for decades.
Why choose us?

Trusted professionals in Syracuse

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Syracuse

All your work handled by qualified professionals in Syracuse

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

323+ Verified Client Reviews in Syracuse

⭐⭐⭐⭐⭐ 4.9/5 · 323 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Syracuse · Response within 24h · No commitment · ☎ (315) 679-5055

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Syracuse ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm