Serving the Syracuse area  ·  (315) 679-5055  ·  Open Mon-Sun 7am-7pm
📞 (315) 679-5055 Free Quote

Metal Roofing in Camillus, NY (13031) · Local Professionals

Syracuse Metal Roofing · Fast response in Camillus and the Syracuse area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+323Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Camillus is the kind of town where a 1960s split-level on a wooded lot off Warners Road sits a mile from a brand-new colonial in a subdivision near the fairgrounds, and both roofs take the same lake-effect pounding every winter. The village core along Genesee Street has older homes with steep pitches and tight lots, while the newer developments out toward Camillus Park and the hills above the Seneca River have larger footprints and taller rooflines that catch every gust off the open fields. Snow slides, ice dams, and wind-driven rain are not abstract concerns here; they are annual events.

Homeowners in 13031 call Syracuse Metal Roofing because we know the difference between a roof that survives a Camillus winter and one that just looks good in July. We have worked on steep Victorian-era roofs near the village center, low-slope additions behind them, and the long ranch rooflines that are common off Kasson Road. If you have ice backing up under the eaves or screws backing out after a windstorm, we can tell you exactly what is happening and what it takes to fix it right.

Metal Roofing in Camillus (13031)

Camillus sits on glacial till and clay, and that matters for roofing more than most homeowners realize. The ground holds water after a thaw, and when a roof dumps snow onto a saturated lawn, the freeze-thaw cycle at the eave line is relentless. On the older homes near the village, we often find original skip sheathing and undersized rafters that need attention before any metal goes down. On the newer construction toward the hills, the issue is often wind uplift at the ridge and gable ends, where panels can loosen if the fasteners were not set to spec. Access is another factor: some of the village lots are narrow with mature maples close to the house, so staging and material delivery need planning. We have seen plenty of roofs where a previous contractor cut corners on flashing at a chimney or skylight, and that is usually where the leak starts.

Our team has been installing, repairing, and replacing metal roofs across the Syracuse area for years, and Camillus is one of our regular stops. We know which profiles work on a steep Queen Anne roof and which panels make sense on a low-slope porch roof. We also know the local building department and what they look for on a re-roof, so we can help you avoid surprises.

Our services in Camillus

How a Job Works in Camillus

Step 1: You call us at (315) 679-5055 or send a request, and we schedule a free on-site assessment. We look at the roof from the ground and, when safe, from above. We check the flashing, fasteners, seams, and attic ventilation. We also look at the gutters and downspouts, because a metal roof sheds snow and water differently than asphalt. You get a written estimate with options, not a high-pressure sales pitch.

Step 2: Once you approve the scope, we pull the permit if one is required by the town or village. We order materials and schedule the work. On tight village lots, we plan where the dumpster and materials go so we do not block your neighbor's driveway. If your home is in a historic district or has HOA design rules, we help you understand what profiles and colors are allowed before we order anything. Most residential metal roofs take a few days to a week, depending on the size and complexity.

Step 3: We clean up every day and do a final walkthrough with you. We use magnets to pick up screws and nails, and we haul away all old materials. You get a chance to look at the finished work and ask questions. We do not consider the job done until you are satisfied.

Pricing for metal roofing in Camillus depends on the size and pitch of your roof, the condition of the decking, the number of penetrations (chimneys, skylights, vents), and access. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts around $7 per square foot, and standing seam starts around $10 per square foot. Metal shingle and stone-coated steel start around $9 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. Snow guards and ice protection start at $1,200. We give free estimates, and we are happy to walk you through the numbers so you can compare options. Call (315) 679-5055 to set up a time.

My house is near the village center in Camillus and has a steep roof with original skip sheathing. Can you install metal over that?
We can, but we need to inspect it first. Skip sheathing can be fine if the boards are sound and the spacing is right, but we often recommend installing a solid substrate or purlins to give the metal a proper nailing surface. On steep roofs, we also pay close attention to snow guards and eave flashing because the snow will slide fast. We will tell you what we find and give you options.
A windstorm just lifted some panels on my roof off Kasson Road. How fast can you get out to Camillus?
We prioritize active leaks and storm damage. Call us at (315) 679-5055 and describe the damage. We can often get someone out within a day or two for an inspection, and if it is an emergency, we can tarp or secure the area to prevent further water intrusion. We work with your insurance company on documentation if needed.
What does a typical metal roof replacement cost for a ranch house in Camillus?
For a ranch in the 1,500 to 2,000 square foot range with a simple gable roof, a standing seam replacement might run in the range of $10 to $14 per square foot installed, depending on tear-off, decking repairs, and flashing details. A corrugated panel roof could be closer to $6 to $9 per square foot. We give free estimates so you get a real number for your specific roof.
Do I need a permit to replace my roof in Camillus, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in the Town of Camillus and the Village of Camillus, but thresholds and fees vary. We pull the permit for you when one is required and coordinate the inspection. We always defer to the local building department for the final word on what is needed.
My neighbor and I share a property line, and my roof drains onto their yard. Can you help with gutter placement?
Yes. We can adjust gutter and downspout placement to direct water away from the property line, and we can talk through options like rain barrels or splash blocks. If there is an HOA, we can help you get approval for any changes. We do not get involved in property line disputes, but we can suggest practical solutions that keep the peace.
Are you insured for work on my Camillus home?
Yes, we are fully insured with general liability and workers' compensation coverage. You should never let an uninsured contractor on your roof.
What should I do to prevent ice dams on my metal roof in Camillus before winter?
The key is attic ventilation and insulation. If warm air escapes into the attic, it melts snow on the roof, which refreezes at the eaves and creates ice dams. We check ventilation during our inspection and can recommend improvements. We also install snow guards and ice protection to help manage snow shedding. Before the first big snow, make sure your gutters are clear and your downspouts are directed away from the foundation.
Why choose us?

Trusted professionals in Syracuse

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Syracuse

All your work handled by qualified professionals in Syracuse

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

323+ Verified Client Reviews in Syracuse

⭐⭐⭐⭐⭐ 4.9/5 · 323 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Syracuse · Response within 24h · No commitment · ☎ (315) 679-5055

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Syracuse ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm