Serving the Syracuse area  ·  (315) 679-5055  ·  Open Mon-Sun 7am-7pm
📞 (315) 679-5055 Free Quote

Metal Roofing in DeWitt, NY (13214) · Local Professionals

Syracuse Metal Roofing · Fast response in DeWitt and the Syracuse area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+323Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

DeWitt's 1950s and 60s ranches and split-levels are solid homes, but their original shingle roofs are feeling every one of those 60-plus Syracuse winters. If you live off East Genesee Street or near Jamesville Road, you already know the drill: ice dams at the eaves, granules in the gutters, and shingles that curl after a lake-effect squall.

We're Syracuse Metal Roofing, and we've been solving those exact problems for homeowners in DeWitt (13214) for years. From the split-levels near ShoppingTown to the brick ranches off Erie Boulevard, we know how these roofs fail and how to fix them for good.

Metal Roofing in DeWitt (13214)

DeWitt sits on the same glacial till and clay that underlies much of Onondaga County, which means drainage matters. When snow melts fast after a warm spell, water needs somewhere to go. Older DeWitt lots often have mature sugar maples and Norway maples close to the house, so gutters fill with debris and ice dams form at the eaves. Many of these ranches and split-levels also have low-slope sections over additions and garages, where shingles wear out faster. We see a lot of failed fasteners, separated seams, and flashing gaps around chimneys and skylights, especially on homes that have been through 50 or 60 freeze-thaw cycles.

Our team has worked on roofs all over DeWitt, from the streets near the DeWitt Community Library to the neighborhoods around Moses DeWitt Elementary. We know the tight driveways, the mature trees, and the way lake-effect snow drifts against north-facing slopes. Whether you need a full metal roof replacement, a retrofit over existing shingles, or a targeted repair, we bring the right approach for your property.

Our services in DeWitt

How a Job Works in DeWitt

Step 1: You call us at (315) 679-5055 or request a free estimate online. We schedule an on-site assessment at your DeWitt home, usually within a few days. We'll inspect your roof, attic, and flashing, and talk through options like metal roof over shingles, standing seam, or a repair if that's all you need. You get a written estimate with clear pricing.

Step 2: Once you approve, we pull the required permits through the local building department. In DeWitt, that often means coordinating with the town or city office, and we handle that for you. If your home is in an HOA or historic district, we'll help with design review and color choices. On install day, our crew protects your landscaping, sets up safe access (even on tight lots with mature trees), and gets to work. We keep you posted on progress and any surprises we find under the old roof.

Step 3: When the job is done, we do a full cleanup, magnet-sweep for nails, and walk the property with you. We don't leave until you're satisfied and your yard is clean.

Pricing for metal roofing in DeWitt depends on the size and pitch of your roof, access, the condition of the existing roof, and the material you choose. For a typical ranch or split-level, metal roof over shingles (retrofit) starts around $7 per square foot, while a full metal roof replacement starts around $9 per square foot. Standing seam runs from $10 per square foot, and corrugated or ribbed panel roofing starts at $5.50 per square foot. Smaller jobs like metal roof repair or leak repair start at $450, and screw replacement or re-fastening starts at $750. We always provide a free, no-pressure estimate so you know exactly what to expect. Call (315) 679-5055 to schedule yours.

My 1960s split-level in DeWitt has ice dams every winter. Can a metal roof help?
Yes. Ice dams form when heat escapes through the roof and melts snow, which refreezes at the cold eaves. A metal roof with proper underlayment and ventilation sheds snow more effectively and reduces the freeze-thaw cycle that causes dams. We often recommend adding ice and water shield at the eaves and improving attic insulation and ventilation at the same time. We can assess your DeWitt home and recommend the right system.
A storm just blew some panels loose on my roof near Jamesville Road. How fast can you respond?
We offer free storm and wind damage inspections in DeWitt and the surrounding area. Call us at (315) 679-5055 and we'll schedule a visit as soon as possible, usually within 24 to 48 hours for emergencies. We can tarp or secure the area to prevent further damage and provide a written estimate for repairs.
What does a typical metal roof replacement cost for a ranch home in DeWitt?
For a standard ranch in DeWitt, a full metal roof replacement typically starts around $9 per square foot, but the final price depends on roof size, pitch, access, and whether we need to remove existing layers. A retrofit over shingles can start around $7 per square foot. We provide a free estimate with a detailed breakdown so you can see the numbers before you commit.
Do I need a permit for a metal roof in DeWitt, and who handles it?
Yes, roofing permits are commonly required for a full replacement or re-roof in DeWitt, and requirements vary by jurisdiction. We handle the permit application and coordinate inspections with the local building department as part of your project. We'll also let you know if your home is in a historic district or HOA that requires design review.
My neighbor's tree limbs hang over my roof. What are my options if they cause damage?
If a neighbor's tree limb falls on your roof, your homeowner's insurance typically covers the damage to your property. We can provide a detailed inspection report and photos for your insurance claim. For preventive trimming, it's best to discuss with your neighbor. If your HOA has rules about trees and property lines, we can help you understand what's allowed before any work begins.
Are you fully insured for roofing work at my DeWitt property?
Yes, Syracuse Metal Roofing is fully insured with general liability and workers' compensation coverage. We're happy to provide proof of insurance before we start any work on your DeWitt home.
What maintenance does a metal roof need in DeWitt's climate?
Metal roofs are low maintenance, but in DeWitt's snowbelt, we recommend an annual inspection to check fasteners, seals, and flashing, especially after heavy snow or wind. Keep gutters clear of maple leaves and debris to prevent ice dams. We offer free estimates for inspections and can set up a maintenance plan to keep your roof performing for decades.
Why choose us?

Trusted professionals in Syracuse

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Syracuse

All your work handled by qualified professionals in Syracuse

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

323+ Verified Client Reviews in Syracuse

⭐⭐⭐⭐⭐ 4.9/5 · 323 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Syracuse · Response within 24h · No commitment · ☎ (315) 679-5055

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Syracuse ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm