Serving the Syracuse area  ·  (315) 679-5055  ·  Open Mon-Sun 7am-7pm
📞 (315) 679-5055 Free Quote

Metal Roofing in Solvay, NY (13219) · Local Professionals

Syracuse Metal Roofing · Fast response in Solvay and the Syracuse area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+323Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Solvay is a village of tight streets and older homes, many of them frame doubles and brick two-families built for the Solvay Process Company workers a century ago. The low-pitched roofs on these houses take a beating from lake-effect snow and ice, and that is where we come in.

Syracuse Metal Roofing is based just up the road in Syracuse, and we serve Solvay (13219) and the surrounding neighborhoods. If you live near the Village Green or off Milton Avenue, you have probably seen the kind of ice dams and fastener failures we fix every winter. Call us at (315) 679-5055 for a free inspection.

Metal Roofing in Solvay (13219)

Solvay sits in a pocket where the lake-effect snow comes off Onondaga Lake and dumps on the village. The housing stock here is older, with many homes dating to the 1880s through the 1920s. You will find a lot of low-slope roofs on the doubles and two-families, plus steep gabled and hipped roofs on the Victorians and Colonials. The ground is glacial till and clay, so drainage is slow, and that matters when we are setting up ladders and staging materials. Many lots are narrow with shared driveways, and some streets are so tight that we have to plan where the dumpster goes before we ever start. We know the difference between a roof on a brick two-family off Charles Avenue and a Cape Cod near the high school. Our team has worked on enough Solvay roofs to know that ice damming at the eaves and failed fasteners are the two most common problems here, and we plan every job around them.

We have been serving Solvay and the greater Syracuse area for years, and we understand the local building department requirements, the historic district design review if your home is in one, and the insurance documentation you may need after a storm. We are fully insured with general liability and workers' compensation.

Our services in Solvay

How a Job Works in Solvay

Step 1: You call us at (315) 679-5055 or fill out our contact form. We schedule a free on-site assessment, usually within a couple of days. We walk the roof, check the flashing, seams, and fasteners, and look for signs of ice damming or leaks. Then we give you a written estimate with options.

Step 2: Once you approve the estimate, we pull the permit if one is required. In Solvay, roofing permits are commonly required for a full replacement, and the village office will tell us the current fees and inspection requirements. We schedule the work around the weather, which in this part of Onondaga County means watching the forecast closely. On tight lots, we stage materials in the driveway or on the street according to village rules, and we protect your landscaping and siding. If your home is in a historic district or HOA, we coordinate the design review so the panel profile and color meet the rules.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and do a final walkthrough with you. We do not leave until you are satisfied and we have shown you exactly what we did.

Pricing in Solvay depends on the size and pitch of your roof, the condition of the existing decking, access, and how urgent the work is. For a typical metal roof repair or leak repair, most jobs start around $450. Screw replacement and re-fastening starts at $750. If you are considering a full replacement, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof over shingles at $7 per square foot. Stone-coated steel and metal shingle roofing start at $9 per square foot, and copper or specialty metal starts at $20 per square foot. We also offer metal roof coating and painting from $2.50 per square foot, which can extend the life of an existing metal roof. For a free estimate tailored to your Solvay home, call (315) 679-5055.

My house is a brick two-family off Milton Avenue with a low-pitched roof. What is the best metal roofing option for that kind of Solvay home?
For low-pitched roofs on older brick doubles, standing seam or corrugated panels are often the best fit because they handle snow load and shed ice well. We also check the decking and flashing carefully, since these homes often have older construction that needs attention before we install. We can walk your roof and give you options that match the house.
A storm just peeled back some panels on my roof near the Solvay village center. How fast can you get out for an emergency repair?
We prioritize storm damage calls in Solvay and the surrounding area. Call us at (315) 679-5055, and we will schedule a free inspection as soon as possible, often the same day or next day depending on weather. We can tarp or secure the roof to prevent further damage and then give you a repair estimate.
What does a typical metal roof repair cost in Solvay, and what factors affect the price?
Most repairs start around $450, but the final cost depends on the extent of the damage, roof access, and whether we need to replace flashing or fasteners. Leak repairs and screw replacement are common in Solvay because of ice and snow. We provide a written estimate before any work begins.
Do I need a permit for a metal roof replacement in Solvay, and how does the village handle inspections?
Yes, the Village of Solvay typically requires a permit for a full roof replacement or re-roof. Requirements and fees can change, so we always confirm with the village building department before starting. We handle the permit application and schedule the required inspections so you do not have to worry about it.
My neighbor and I share a property line, and I want to make sure the new roof does not cause drainage issues. What should I know?
We respect property lines and design the roof and gutters so water flows away from your foundation and does not create problems for your neighbor. If your home is in an HOA or historic district, we also help with design approval. We can discuss the layout during your free estimate.
Are you fully insured for work on my Solvay home, and what does that cover?
Yes, we carry general liability insurance and workers' compensation coverage. That protects you and your property in case of an accident. We are happy to provide proof of insurance before we start any job.
What maintenance should I do each year to prevent ice dams on my metal roof in Solvay?
Keep gutters and downspouts clear, especially before winter. Check for snow buildup at the eaves and use a roof rake if needed. We also recommend an annual inspection to catch loose fasteners or sealant issues early. Call us at (315) 679-5055 to schedule a maintenance check.
Why choose us?

Trusted professionals in Syracuse

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Syracuse

All your work handled by qualified professionals in Syracuse

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

323+ Verified Client Reviews in Syracuse

⭐⭐⭐⭐⭐ 4.9/5 · 323 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Syracuse · Response within 24h · No commitment · ☎ (315) 679-5055

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Syracuse ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm